You are here

Alternative Options for Aerial Soybean Desiccation

Filed Under:
Publication Number: P3916
View as PDF: P3916.pdf

Paraquat (for example, Gramoxone® 2SL) is a popular choice in Mississippi soybean production as a burndown herbicide application and harvest aid. Studies conducted at Stoneville, Mississippi, during 2016 and 2017 demonstrated that paraquat applied alone was not only the most effective desiccant, but also the most cost-effective option as a soybean harvest aid (Orlowski 2018). In July 2021, the Environmental Protection Agency (EPA) placed aerial application limitations on paraquat to 350 acres per applicator per 24-hour period. These limitations have potential to cause major issues in areas of moderate to large soybean acreage if field conditions are less than ideal as soybeans approach later maturity stages. When facing wet conditions that are not favorable for ground harvest-aid applications or when trying to avoid scenarios that can lead to shattering or pod rot in late-season beans, aerial desiccation options other than paraquat are available.

Paraquat is generally applied at 8 to 6 fluid ounces per acre and has a preharvest interval (PHI) of at least 15 days. If aerial limitations have been met for that day, or if time is of the essence, Sharpen® (saflufenacil) can be applied at 1 to 2 ounces per acre when 50 percent leaf drop has occurred. Sharpen® can desiccate broadleaf weeds that can cause harvest complications and has a 3-day PHI. Methylated seed oil (MSO) at 1 percent v/v and AMS at 1 percent v/v are encouraged with the use of Sharpen®. Defol® 5L (sodium chlorate) is another option for aerial application. Sodium chlorate is recommended at a rate of 4.8 quarts per acre when using a 5-pound product and 8 quarts per acre when using a product with 3 pounds of active ingredient per acre. Sodium chlorate formulations are recommended for spraying at 5 gallons per acre when applied aerially. Both formulations provide some weed control in species that can complicate harvest. Sodium chlorate has a PHI of 7 to 10 days. Aim® 2EC (carfentrazone) is a less commonly used harvest aid in Mississippi soybean production systems, but it is a suitable alternative at 1.5 fluid ounces per acre when the crop is mature and grain is already drying down. Aim® has a 3-day PHI and provides broadleaf weed control. Crop oil concentrate or MSO adjuvants should be used with Aim® at 1 percent v/v.

Normal soybean plants with some green and some dead parts.
Natural senescence in a soybean trial before Sharpen was applied as a harvest aid.
Soybean plants beginning to turn brown.
Soybeans 3 days after Sharpen application.
Completely brown soybean plants.
Soybeans 7 days after Sharpen application.

Soybean at the R6.5 and R7.0 growth stages have matured and will not be negatively affected after desiccation applications (Boyd and Antos 2019). Figure 1 shows yields of each desiccation option. Soybean at the R6.5 stage is considered physiologically mature and occurs when the white membrane inside the pod have separated and seed margins are clearly defined (Moseley et al 2021).

Soybeans at different stages of development, from tiny and green to about 1.25 inches long (in pod) and light brown. Two green pods in the center are labeled: 1) Seed with the white membrane not detached. Seed margins are not clearly defined. 2) White membrane has detached with clear seed margins.
Soybean reproductive stage distinctions (Moseley et al. 2021).
Impact of Defol 5L on soybean yield at different soybean growth stages: normal dry down, 57.9 bushels per acre yield; R6.0 desiccation, 50.1 bushels per acre yield; R6.5 desiccation, 60 bushels per acre yield; and R7 desiccation, 61.5 bushels per acre yield.
Figure 1. Impact of Defol® 5L on soybean yield at different soybean growth stages (Boyd and Antos 2019).

In conclusion, aerial desiccant options for soybeans in Mississippi in the absence of paraquat include Sharpen® at 1 to 2 ounces per acre, Defol® 5L at 4.8 quarts per acre, Defol® 3L at 8 quarts per acre, and Aim® at 1.5 ounces per acre. Their respective PHIs are 3 days, 3 days, and 7 to 10 days, respectively. The optimal time for soybean desiccation application is between R-6.5 and R-7.

References

Lsuagcenter. “Applying Harvest Aids in Louisiana Soybean.” LSU AgCenter, August 16, 2021.

Mississippi Soybean Promotion Board. (n.d.). Project No. 57-2017 (Year 2) Final Report. Retrieved March 25, 2022.

Pioneer. (January 5, 2020). Timing soybean desiccation as a harvest aid. Pioneer® Seeds. Retrieved March 19, 2022.

ILSoy Advisor. Using Harvest Aids and Desiccants in Soybeans. October 8, 2021.


The information given here is for educational purposes only. References to commercial products, trade names, or suppliers are made with the understanding that no endorsement is implied and that no discrimination against other products or suppliers is intended.

Publication 3916 (POD-06-23)

By Michael Huoni, Graduate Research Assistant; Whitney Crow, PhD, Assistant Professor; and Cori Speights, PhD, Extension Associate I, Biochemistry, Molecular Biology, Entomology, and Plant Pathology. Photos taken by Trent Irby, MSU Extension Soybean Specialist.

Print Friendly, PDF & Email

The Mississippi State University Extension Service is working to ensure all web content is accessible to all users. If you need assistance accessing any of our content, please email the webteam or call 662-325-2262.

Authors

Graduate Research Assistant
Portrait of Dr. Whitney Desiree Crow
Assistant Professor

Your Extension Experts

Portrait of Dr. Trent Irby
Assc Dir & Ext Prof