You are here

How Much Meat to Expect from a Beef Animal: Farm-Direct Beef

Filed Under:
Publication Number: P3489
View as PDF: P3489.pdf

Consumers and beef producers are taking advantage in ever-growing numbers of local food systems, and this includes purchasing or raising beef to have processed locally. Many are often surprised by the amount of packaged beef that they receive and struggle with how to plan their freezer space. This may often be a point of contention and misunderstanding between consumers, beef producers, and beef processors. This publication will help you determine how much meat to expect from a beef animal. For more information, see MSU Extension Publication 2522 Beef Grades and Carcass Information.

It is important to understand that a 1,200-pound beef animal does not yield 1,200 pounds of beef in the freezer. As beef is processed, the removal of skin, fat, bone, and organs drastically reduces the final weight. Moisture loss due to evaporation throughout processing also impacts the final amount of take-home beef. With every cut made to the carcass, the final take-home beef weight decreases.

Dressing Percentage

The dressing percentage is hot carcass weight as a percentage of the live weight of the animal at harvest. The hot carcass weight is calculated after the head, hide, and internal organs have been removed.

The following formula is used to calculate the dressing percentage:

(hot carcass weight ÷ live animal weight) × 100

where hot carcass weight = weight of the unchilled carcass after the removal of the head, hide, and internal organs

The average dressing percentage of beef cattle is 60 to 64 percent. However, dressing percentage can vary widely. For example, a 1,200-pound steer with a hot carcass weight of 756 pounds would have a 63 percent dressing percentage. A common misconception is that the consumer will be bringing home 63 percent of the animal’s live weight (average dressing percentage). However, this 63 percent includes bone, fat, and moisture, which will be lost during processing.

Several factors affect dressing percentage, including the weight of the head, hide, horns, gut fill, and mud and manure on the hide. In addition, animal type, breed, and even how the animal was finished influence the dressing percentage. For example, we expect grass-finished cattle to have a lower-than-average dressing percentage, while an animal that was over-finished (too much external fat) would have a higher-than-average dressing percentage.

Although there is a standard formula to calculate dressing percentage across animal types, it is important to note that some processors weigh animals on the farm before shipping (allowing time for the digestive tract to empty), and some weigh animals right before harvest. Dressing percentage does not give a precise amount of beef for the freezer; it is just the first step of many where weight is lost.

Carcass Chill

Hot carcass weight is called such because it is the weight directly from the processing floor. The next important step in the process is to chill the carcass. Chilling affects carcass weight because moisture is lost from water evaporation. A carcass is approximately 70 to 75 percent water. This moisture is lost in the cooling process, and this loss is not accounted for in the dressing percent.

As the carcass is cooled, water evaporates from the carcass, causing losses of 2 to 5 percent of the hot carcass weight. This occurs over a 24-hour period and is called cooler shrink.

Aging

Aging is simply the process of holding whole beef carcasses or wholesale cuts at refrigerated temperatures to allow for improved tenderness and flavor through natural processes. Beef can be aged for 4 to 5 weeks to improve tenderness, but aging time often depends on the processor’s cooler space. The method and length of aging will vary from processor to processor. When the carcass is dry-aged (not vacuum packaged), some weight will be lost during the process from further water evaporation, and some dried edges will need to be trimmed during the process. Beef that is aged for longer periods of time will weigh less.

Primal Cuts

After the carcass is chilled and aged, it will be further processed into cuts. First, the carcass will be split into sides (also called halves). A side is half of a dressed carcass split from nose to tail. Each half will be split into quarters. Consumers often do not want to purchase a whole animal on their own and may half or quarter them with others.

From this point, the quarters are then fabricated to primals. The roundloinrib, and chuck are the major primal cuts. The front quarter gives the rib chuckbrisket, and plate. The hindquarter gives the flankroundsirloin, and loin. These primal cuts are further divided into subprimal cuts.

Subprimals, or retail cuts, are cuts of meat that allow tender muscle to be separated from less tender muscle, thick muscle to be separated from thin muscle, more valuable cuts to be separated from less valuable cuts, and lean to be separated from fat. As the carcass is processed further, resulting in more bone and fat being removed, final weight is further reduced.

One of the biggest benefits of having a beef animal butchered is the flexibility in determining desired cuts. Tables 1 and 2 illustrate the cut options for each of the primal and subprimal cuts.

Cut Choices

Perhaps the most daunting task of having an animal custom processed is choosing which cuts of beef to take home. Custom fabrication is one of the highlights of processing beef locally. This section describes the choices available for each of the primal cuts. Figure 1 describes each primal and the retail cuts found in each section of the carcass. For more details on the cuts of beef from each primal, along with suggested cooking methods and recipes, visit https://www.beefitswhatsfordinner.com/cuts.

Outline of a beef cow with primal sections and retail cuts labeled.
Figure 1. Retail cuts of beef available from each primal section. Image courtesy of The Beef Checkoff.

Chuck

The chuck is generally divided into four subprimals.

  • The chuck tender can be left whole as chuck tender roast or sliced into lean chuck tender steaks.

  • The chuck roll can be separated into two subprimals: the chuck eye roll and the under blade. The roll can be left in its entirety as a roast but can also be cut into Delmonico steaks and country-style ribs. The under blade comes from the flatter portion of the chuck roll that is under the chuck eye roll. The under blade is the fourth-most tender muscle. It can be left whole in roast form or be sliced into the value-added cuts Sierra steak and Denver steak.
  • The shoulder clod yields three subprimals. The shoulder clod arm roast can be fabricated into three steaks from its traditional roast form: arm chuck steak, ranch steak, and shoulder steak. The shoulder petite tender can be sliced from its roast form into petite tender medallions. The top blade can be fabricated into the popular flat iron steak and the top blade steak.
  • The square-cut chuck mostly ends up as ground beef, but there are several options for fabrication, including seven-bone chuck steak, blade chuck steak, seven-bone chuck roast, blade chuck roast, cross rib chuck roast, chuck neck roast, chuck short ribs, pectoral meat, and chuck flap/edge roast.

Brisket

The brisket can be left whole or divided into the leaner brisket flat and the brisket point, which is fattier. Customers choosing not to keep the brisket whole generally opt for it to be included in ground beef.

Shank

Popular options for the shanks include ground beef or stew meat. However, it can be cut into cross sections, known as the shank crosscut, to be made into dishes like osso buco.

Rib

Some of the most flavorful and tender cuts of beef come from the rib. There are two subprimals from the rib and many options within each.

  • The ribeye roll can be left intact for a ribeye roast to slice into prime rib steaks. More traditionally, ribeye steaks or ribeye filets are chosen from this subprimal.
  • The rib also contains a subprimal bearing its own name. The rib subprimal contains back ribs, rib fingers, and rib short ribs.

Plate

The plate primal is located directly under the rib. Sometimes this section is used to yield stew meat and ground beef, but there are other choices. Inside and outside skirt steaks are perfect for fajitas. Hanger steaks and plate short ribs are other popular options from this primal.

Loin

The loin primal has some of the most tender and popular cuts. It is important to note that choosing one option will mean you cannot choose another. The subprimals are tenderloin, strip loin, and short loin.

  • The tenderloin can be isolated from the strip loin and cut into a tenderloin roast or filet mignon steaks. This will leave the strip roast, which yields New York strip steaks when sliced.
  • From the short loin, the tenderloin and strips come together to yield porterhouse and T-bone steaks. It is important to note that the porterhouse is a combination of the strip and tenderloin, so if your selection is for filet mignon and strip steaks, porterhouse steaks will not be an option.

Sirloin

The sirloin is broken into two subprimals, bottom sirloin butt and top sirloin butt.

  • From the bottom sirloin, the tri-tip roast and petite sirloins can be fabricated.
  • The top sirloin butt can be left whole and trimmed as a lean top sirloin petite roast or sliced into top sirloin steaks.

Flank

Flank steak is the only major option for the flank. It is excellent for fajitas or stir-fries.

Round

The heaviest wholesale cut of the carcass is the round. It makes up the rump and hind leg muscles, which are used for movement and are leaner and less tender. The round can make flavorful roasts, steaks that could be tenderized for country fried steak or cube steak, or ground beef. There are four subprimals in the round.

  • Bottom round can be cut into roasts (bottom round, bottom round rump, and outside round rump) or sliced into steaks, which should be tenderized or marinated before grilling.
  • Eye of round can be fabricated into eye of round roast (often used for deli roast beef) or sliced into steaks, which should be marinated before grilling.
  • Sirloin tip should be left in roast form or ground into hamburger. However, if sliced into steaks, they should be marinated before grilling for best results.
  • Top (inside) round is derived from the inside of the rear leg. The top round roast is a popular option for this subprimal, but it can be sliced into steaks. The top inside round cap (or Santa Fe steak) can be used like the skirt or flank steak.

Factors Affecting Yields of Retail Cuts

The amount of final packaged meat depends on factors such as fat, bone, aging, and muscularity of the carcass. Carcass fat has the greatest impact on the amount of product from the carcass. The more external fat an animal has, the more trim will be lost. Thus, not only does over-finishing lead to increased feed costs, but it will actually result in less final product due to excess trim. Improved carcass muscularity will increase the percent retail product of a carcass. For example, dairy-type animals will have decreased product amount compared to beef-type animals. However, it is important to note that carcass fat has a greater impact on decreasing final product amount than muscle has on increasing retail product.

Cutting directions will also impact the amount of product from a carcass. If more boneless cuts are selected, the weight of retail product will decrease. Trimming of retail cuts leads to decreased yield as well as decreased fat in ground beef.

Aging also impacts yield. While aging is desirable to improve tenderness and increase beef flavor, longer aging periods result in increased moisture loss from the carcass. In addition, increased dry-aging results in increased dehydration of the surface of the carcass, which can lead to dry, leathery areas that need to be trimmed off. Loss from longer aging is increased in carcasses with little external fat.

Specific factors impacting retail yield:

Carcass fat: External fat over ¼-inch thick is trimmed from retail cuts. This trimming is one of the greatest losses in weight from the carcass and results in a lower percent of retail cuts from the carcass.

Muscularity: The more muscular a carcass, the greater the retail cut yield.

Bone-in versus boneless cuts: Boneless cuts will result in lower total weight of retail cuts.

Ground beef type: A leaner ground beef will have less fat and, therefore, a lower final yield weight and less take-home product.

Carcass abnormalities: Carcass abnormalities include bruising and abscesses. They are removed, resulting in lower total poundage of retail cuts.

Aging: While aging improves tenderness, it has a negative effect on total yield. The longer meat is aged, the greater the carcass weight loss. The loss occurs for two reasons. First, carcass dehydration removes water weight. Second, if the meat is dehydrated for an extended period, the dehydrated, dry areas are removed, which reduces the yield.

Example Retail Yield

Tables 1 and 2 give a thorough example of the amount of meat and cut options that can be expected from the 1,200-pound steer described here:

If you purchase a 1,200-pound steer with a dressing percent of 63, expect a hot carcass weight of 756 pounds. After the carcass is chilled, assuming a 4 percent cooler shrinkage, it will have a weight of about 726 pounds. If mostly boneless cuts are selected, another 30–40 percent will be lost as fat trim and bone. This puts you at approximately 470 pounds of beef that will be put into the freezer.

A general rule of thumb is that the take-home weight of packaged beef will be approximately 40 percent of the animal’s live weight, or 75 percent of the hot carcass weight.

Note that these are only estimates. Actual values vary based on the type of animal, fabrication choices, and so forth, as mentioned previously.

Table 1. Estimated amount of meat expected from the hindquarter of a 1,200-pound steer.1

Primal/Subprimal cuts and % of freezer-ready meat2

Pounds of freezer-ready meat

Hindquarter cuts

Cut options3

Number per half beef

flank 4%

18.8

flank

steak

grind

 

1

sirloin 9%

42.3

sirloin

steak

grind

 

8 steaks

short loin 8%

37.6

porterhouse and T-bone steak/filet and NY strip steak

porterhouse and T-bone steak

filet and NY strip steak

 

14 steaks

round 24%

112.8

sirloin tip

roast

steak

cubes

1 roast

top round

roast

steak

tenderized steak

 

eye of round

roast

steak

tenderized cube steak

 

bottom round

roast

cubed

   

rolled rump

roast

cubed

   

1Amount of retail cuts expected from 470 pounds of beef resulting from mostly boneless cut choices.

2Percent of freezer-ready beef expected from each primal cut.

3May select only one of the available cut options for each.

Table 2. Estimated amount of meat expected from the front quarter of a 1,200-pound steer.1

Primal/Subprimal cuts and % of freezer-ready meat2

Pounds of freezer-ready meat

Front quarter cuts

Cut options3

Number per half beef

rib 9%

42.3

primal rib

rib steak

rib eye steak

rib roast

 

chuck 25%

117.5

chuck short ribs

short ribs

ground beef

   

chuck

boneless chuck roast

chuck steak

ground beef

18 steaks or 6–8 roasts

arm

arm roast w/ bone in

boneless roast

ground beef

2–4 roasts

brisket 6%

28.2

brisket

whole

cut in half

ground beef

1 roast

short plate 7%

32.9

skirt steak

steak

ground

   

short ribs

ribs

ground

   

suet and hanging tender 4%

18.8

hanger steak

 

ground

   

shank 4%

18.8

shine bone w/ meat

pieces for soup

ground beef

   

stew beef

pieces

ground

   

1Amount of retail cuts expected from 470 pounds of beef resulting from mostly boneless cut choices.

2Percent of freezer-ready beef expected from each primal cut.

3May select only one of the available cut options for each

Summary

Determining how much product to expect from a beef carcass can be confusing for producers and consumers alike. Producers marketing beef directly to consumers should communicate proper expectations when discussing their needs and wants. This publication is designed to help cattle producers have those discussions with clients.

References

Cattlemen’s Beef Board and National Cattlemen’s Beef Association. (2014). Beef Cuts Guide: Primal and Subprimal Weights and Yields.

Holland, Rob. (2014). How Much Meat to Expect from a Beef Carcass. University of Tennessee. Knoxville, TN.


Publication 3489 (POD-09-23)

By Brandi Karisch, PhD, Associate Extension/Research Professor, Animal and Dairy Sciences; Madeline Poss, Beef Extension Intern, Animal and Dairy Sciences; and Cobie Rutherford, Extension Instructor, 4-H Youth Development Program.

Print Friendly, PDF & Email

The Mississippi State University Extension Service is working to ensure all web content is accessible to all users. If you need assistance accessing any of our content, please email the webteam or call 662-325-2262.

Authors

Portrait of Dr. Brandi Bourg Karisch
Assoc Extension/Research Prof
Beef Cattle, Nutrition, Management, Health
Portrait of Mr. Cobie Rutherford, Jr.
Extension Instructor
4-H Youth Development

Your Extension Experts

Portrait of Ms. Libby Suzanne Durst
Extension Associate II
Portrait of Dr. Brandi Bourg Karisch
Assoc Extension/Research Prof
Portrait of Dr. Barbara Roqueto dos Reis
Assistant Professor

Related Publications

Publication Number: P2551
Publication Number: P2552
Publication Number: P2528

Pages